17
3. Move the computer closer to the HG658d.
4. Place the HG658d and the computer in another direction.
5. Try to avoid using wireless network connection during thunderstorms.
What can I do if the wireless network is not encrypted but the computer
cannot connect to the wireless network?
1. Delete wireless network configuration from the computer.
The following example uses a computer running the Window XP operating
system:
1) Choose
Start
>
Control Panel
. Double-click
Network Connections
.
2) In the Network Connections window, right-click
Wireless Network
Connection
, and choose
Properties
.
3) In the
Wireless Network Connection Properties
dialog box, click
the
Wireless Networks
tab.
4) In the
Preferred Networks
area, select a wireless network, and click
Remove.
5) Delete all the other wireless network connections from the
Preferred
Networks
area.
6) Click
OK
.
2. Set up an unencrypted wireless network connection.
Does the WPS function have any special requirements on the wireless
encryption settings of the HG658d?
The WPS function can be used only when the security mode of the wireless
network is set to
WPA2-PSK
, or
WPA-PSK/WPA2-PSK
, and the SSID is set
to
SSID1
. It is recommended that you set the security mode to
WPA-PSK/WPA2-PSK
.
What can I do if I cannot set up a wireless connection between the HG658d
and the computer by pressing the
WPS
button?
1. Check that only one computer tries to connect to the HG658d using the
WPS function at a time.
2. Check that the wireless network function and the WPS function in PBC
mode are enabled on the HG658d.
