iManager NetEco 6000
Device Installation and Commissioning Guide
6 Adding Devices
Issue 03 (2019-03-10)
Copyright © Huawei Technologies Co., Ltd.
186
Figure 6-46
Setting SNMPv3 parameters (02)
Step 5
Set
User Name
,
MD5/SHA Password
, and
DES/AES Password
. Confirm
MD5/SHA
Password
and
DES/AES Password
, as shown in
Select
SHA
under
MD5/SHA Password
and
AES
under
DES/AES Password
, or select
MD5
under
MD5/SHA Password
and
DES
under
DES/AES Password
.
Any characters complying with the system can be entered for
User Name
,
MD5/SHA
Password
, and
DES/AES Password
. Record the specified parameters as you will need them
when setting up the ECC500 V6 collector on the NetEco.
MD5/SHA Password
and
DES/AES Password
need to be set to different passwords.
MD5 and DES encryption algorithms are not secure. It is recommended that you set protocol
to
SHA
and
AES
. The following operations use the recommended settings as an example.
Step 6
After you set the parameters, click
Confirm
.
Step 7
Click
Submit
, as shown in
Figure 6-47
Setting the SNMPv3 parameters (03)
Step 8
Click
Add
in
SNMP Trap
, as shown in
