Quidway® ME60-16 Main Process Unit (MPUA)
Copyright ©2007 Huawei Technologies Co., Ltd. All Rights Reserved.
2
http://datacomm.huawei.com
Module
name
Interface
Description
ETH0 Ethernet port
(RJ45)
It is a 10/100/1000BASE-TX Ethernet port. It uses RJ45
connector with ACT and LINK indicators, connecting the
background terminal, for loading and debugging
program. Moreover, the system can connect the devices
such as remote network management workstation
through the interface and realize the remote
management of equipment.
ETH1 Ethernet port
(RJ45)
It is a 10/100BASE-TX Ethernet port. It uses RJ45
connector with ACT and LINK indicators. The interface is
reserved for function expansion and not used in the
current version.
CF card interface
It is used to insert the Compact Flash (CF) card. As the
mass storage device, the CF card is used to store the
system configuration information and alarm log.
System clock input/output
interface
Each MPUA board has a system clock module. The
panel has four coaxial connectors. Where, two input
ports are used to connect the BITS clock input and two
output ports output 2048 KHz or 2048 Kbps clock to the
downstream device.
