●
If you set SNMP Version to ALL or SNMPv1&v2c, you can set Read
Community and Write Community by performing
●
If you set SNMP Version to ALL or SNMPv3, you can add SNMPv3 users by
performing
Step 3 Set Read Community and Write Community.
1. Tap the text box after Read Community, as shown in
. Set Read
Community as planned, tap
, and then tap Submit.
Figure 4-9 Setting read community
2. Tap the text box after Write Community, as shown in
. Set Write
Community as planned, tap
and then tap Submit.
Figure 4-10 Setting write community
Step 4 Add an SNMPv3 user.
1. Tap Add under SNMP V3.
2. Enter a planned value for User Name, select values for Auth Protocol and
Prop Protocol from drop-down list boxes, and tap
, as shown in
MD5 and DES protocols are not secure. It is recommended that you set Auth
Protocol to SHA, and set Prop Protocol to AES. The following operations use
the recommended settings as an example.
NetCol5000-C(030, 032, 065) In-row Chilled Water
Smart Cooling Product
User Manual (2019)
4 Commissioning
Issue 03 (2020-08-30)
Copyright © Huawei Technologies Co., Ltd.
102
