NetCol8000-C(070-260) In-room Chilled Water Smart
Cooling Product
User Manual
3 Installation Guide
Issue 06 (2020-01-13)
Copyright © Huawei Technologies Co., Ltd.
71
The direction in which the main pipes are tightened by using hold hoops is for reference only.
The onsite situation prevails.
Figure 3-41
Removing a hold hoop
Step 4
Remove the hold hoop securing the bend using a 15# socket wrench. To avoid deforming the
pipe, use a 75# open-end wrench to fix the pipe nut, use a 36# open-end wrench to fix the
plug at the lower part of the bend, and then remove the plug, as shown in the following figure.