![background image](http://html.mh-extra.com/html/huawei/netcol8000-e220/netcol8000-e220_user-manual_22074259.webp)
Menu
Name
Description
Default Value
IP address
Specifies the IP address for
the smart cooling product.
192.168.000.01
0
Subnet mask
Specifies the subnet mask
for the smart cooling
product.
255.255.255.00
0
Gateway
Specifies the gateway for
the smart cooling product.
192.168.000.00
1
Settings >
Comm
Settings >
WIFI
Settings
WiFi SSID
Set WiFi SSID based on the
actual configuration; WiFi
SSID is the name used for
the WiFi hotspot over
which a mobile phone can
connect to the smart
cooling product.
NETCOL_6650b
0
WiFi password
Enter the WiFi password
when you use a mobile
phone to connect to the
WiFi. When you enable the
WiFi function for the first
time, you need to set a
password.
-
Enable WiFi
Enable the WiFi function.
Disable
Settings >
Comm
Settings >
Modbus
Settings
Baud rate
Set the baud rate as
required. The value should
be consistent with that set
on the EMS.
9600
Communication
address
Set the communication
address of the smart
cooling product as
planned. The EMS
communicates with the
smart cooling product
through this address, and
the communication
addresses of two smart
cooling products
connecting to the same
EMS must be unique.
1
NetCol8000-E220 Modular Indirect Evaporative
Cooling System
User Manual
C Parameter Description
Issue 06 (2020-08-19)
Copyright © Huawei Technologies Co., Ltd.
250