Step 2
Place the floating nut mounting bar on the top of the floating nut and pull it into the hole until
it snaps into place, as shown in step 2 of
Step 3
Check the floating nut to ensure that it has been properly seated. as shown in step 3 of
Step 4
Slide the clustered NAS engine enclosure into the cabinet, as shown in step 1 of
Step 5
Use M6 screws to secure the clustered NAS engine enclosure into the cabinet, as shown in step
2 of
.
Figure 6-4
Securing the clustered NAS engine enclosure into the cabinet
Step 6
Check that the clustered NAS engine enclosure is horizontally installed and tightly screwed.
Step 7
If you have more than one clustered NAS engine enclosure, Repeat
other clustered NAS engine enclosure to the cabinet.
----End
6.5 Installing Adjustable Guide Rails for an SUC
Before assembling an SUC, you must install adjustable guide rails to bear it. With the adjustable
guide rails, an SUC can be placed into different depths of cabinets.
Prerequisites
The following tools and materials have been ready:
l
Phillips screwdriver (M3 to M6)
OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)
6 N8500 Installation (with S5500T Storage System as the
Storage Unit)
Issue 02 (2015-09-22)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
106
