Command Manual - Security
Quidway S2000 Series Ethernet Switches
Chapter 1 802.1x Configuration Commands
1-7
Description
Using
dot1x port-control
command, you can configure the mode for 802.1x to perform
access control on the specified interface. Using
undo dot1x port-control
command,
you can restore the default access control mode.
By default, the value is
auto.
This command is used to set the mode, or the interface state, for 802.1x to perform
access control on the specified interface. This command has effect on the interface
specified by the parameter
interface-list
when executed in system view. It has effect on
all the interfaces when no interface is specified. The parameter
interface-list
cannot be
input when the command is executed in Ethernet port view and it has effect only on the
current interface.
For the related commands, see
display dot1x
.
Example
# Configure the interface Ethernet 0/1 to be in
unauthorized-force
state.
[Quidway] dot1x port-control unauthorized-force interface Ethernet 0/1
1.1.7 dot1x port-method
Syntax
dot1x
port-method
{
macbased
|
portbased
}
[
interface interface-list
]
undo dot1x
port-method
[
interface interface-list
]
View
System view
Ethernet interface view
Parameter
macbased
: Configures the 802.1x authentication system to perform authentication on
the supplicant based on MAC address.
portbased
: Configures the 802.1x authentication system to perform authentication on
the supplicant based on interface number.
interface interface-list
: Ethernet interface list including several Ethernet interfaces,
expressed in the format
interface-list
=
{
interface-num
[
to
interface-num
] } & < 1-10 >.
interface-num
specifies a single Ethernet interface in the format
interface-num
=
{
interface-type
interface-num
|
interface-name
}, where
interface-type
specifies the
interface type,
interface-num
specifies the interface number and
interface-name
specifies the interface name. For the respective meanings and value ranges, read the
Parameter of the Port Command Manual section.
Summary of Contents for Quidway S2000 Series
