Installation Manual
Quidway S5600 Series Ethernet Switches
Chapter 1 Product Overview
Huawei Technologies Proprietary
1-13
Table 1-6
Fabric port LEDs
LED
Mark
Status
Indicate
Solid green
The fabric port is properly connected.
Blinking
green
The fabric port is properly connected and
the port is receiving or sending data.
Fabric
port LED
UP(DOWN)
OFF
The fabric port is disconnected.
III. Power input
z
AC power input range
Rated voltage: 100 to 240 VAC; 50/60 Hz
Max. voltage range: 90 to 264 VAC; 50/60 Hz
z
DC power input range
Rated voltage:
–
48 to
–
60 V
Max. voltage range:
–
36 to
–
72 V
z
DC input of PoE power module
The S5624P-PWR/S5648P-PWR must use the external PoE PSU recommended by
Huawei-3Com as its DC input, but not the -48VDC power supply generally available in
the equipment room. Otherwise, the device may be damaged.
Rated voltage:
–
53.5 V
Max. voltage range:
–
52 to
–
55 V
1.2.3 Expansion Module
The S5624P/S5624P-PWR provides one expansion module slot on its rear panel. The
expansion module that can be used in this slot includes 8-port 1000 Mbps SFP module,
1-port 10 Gbps XENPAK module, and 2-port 10 Gbps XFP module.
I. 8-port 1000 Mbps SFP module
(1) Port status LEDs
(2) SFP ports
(3) Module power LED
Figure 1-4
8-port 1000 Mbps SFP module
