Huawei Technologies Proprietary
31
just use the default settings. See the attached table for all
VPI&VCI default values of PVCs.
z
QoS:
You can select UBR, CBR and VBR from the
drop-down list, but it is suggested to leave the default
values if you are unsure or the ISP did not provide this
information.
z
PCR&SCR/IP Address/Mask/Default GW/DNS:
Based
on the information provided by your ISP, enter the IP
Address, Subnet Mask, Default Gateway (if provided), and
DNS values (if provided).
z
Mode:
Select the desired Mode, Bridged or Routed.
V.
DHCP
Dynamic Host Configuration Protocol (DHCP) allows the
gateway to obtain the IP address automatically from a DHCP server
on the service provider’s network. The service provider assigns a
global IP address from an available address pool. Typically the IP
address assigned has a long lease time, so it will likely be the same
address each time WA1003A requests an IP address.
Click
New Connection
under
WAN Setup
to enter the
Connection Setup
configuration menu. Select
DHCP
in the
Type
drop-down list to display the
DHCP
Connection Setup
page.
