Huawei Technologies Proprietary
34
Figure 4-13
Configure Connection – CLIP (IPoA)
z
Name:
Type in a Name for the connection, such as PVC0.
z
Type:
Select CLIP from the drop-down list.
z
Options:
Enable NAT and/or Firewall by selecting
corresponding check boxes.
z
VPI&VCI:
If prompted to change the VPI or VCI values,
type in the values given by your service provider. You may
just use the default settings. See the attached table for all
the VPI&VCI default values of PVCs.
z
QoS:
You can select UBR, CBR and VBR from the
drop-down list, but it is suggested to leave the default QoS
values if you are unsure or the ISP did not provide this
information.
z
PCR&SCR:
Do not change the PCR or SCR values unless
you are required to do so. If prompted to change these,
type in the values given by your service provider.
