![background image](http://html.mh-extra.com/html/huawei/rp-series/rp-series_install-manual_167807080.webp)
HUAWEI RP100&RP200 V100R001C04B010
Upgrade Guide
6 Display Settings
Issue 01 (2013-06-18)
Huawei Confidential.
79
6
Display Settings
6.1 Precautions
l
Do not adjust the image parameters.
l
Set the video input source to
HDMI 1
and presentation input source to
PC
.
l
Disable
No signal stand by
. Otherwise, the RP performance may be affected.
l
After the HD display is installed, set its power switch to ON.
There are two ways to boot delay when the new TCL’s TV on startup and the”
ON
”is
corresponds to the 60s and the “
OFF
” is corresponds to 23s.when the TV supporting the
TE30 terminal, you need to boot delay corresponding parameter is set to “
ON
” and the
power-delay defaults to 60s.
6.2 Setting the System Language
Step 1
Press the menu key on the remote control of the HD display, scroll to
Settings
, and press
OK
.
Step 2
Scroll to
Picture
and press
OK
. Scroll to
Function
and press
OK
.
Step 3
Scroll to
Language
and press
OK
. Scroll to the desired language and press
OK
.
----End
6.3
Disabling
No Signal Stand By
Step 1
Press the menu key on the remote control, scroll to
Settings
, and press
OK
.
Step 2
Scroll to
Picture
and press
OK
. Scroll to
Function
and press
OK
.
Step 3
Scroll to
No signal stand by
and press
OK
.
----End