30/31 >>
Appendix
Appearance of the waterproof socket
a
Thread the outdoor fiber through the waterproof socket.
b
Thread the outdoor fiber through the shell, rubber washer,
and collar. Insert the rubber washer into the collar.
Remove the dustproof cap on the flange socket
of the GE/COMBO port and carefully insert the
LC/PC connector of the outdoor fiber into the
optical module.
Turn the collar to align it with the slot on the flange socket
and push the socket into the slot to fix the socket on the
flange socket.
Tighten the shell of the waterproof socket.
Ensure that the rubber washer remains in the
correct position in the socket.
Insert the washer side with a V-shaped slot into the collar.
See the following figures. Ensure that the V-shaped slot
securely engages the collar.
The shell is completely tightened when the red O-ring
cannot be seen.
Installing the Waterproof Socket for the Outdoor Fiber
Collar
Rubber washer
Shell
Flange socket of the GE/COMBO port
Red O-ring
•Ensure that the V-shaped slot securely engages the collar.
•Ensure that the rubber washer is well sealed. No crack should be observed.
Well sealed
Cracked
