S
T
A
T
Installation Reference
Installing the RTN 380e
Change the polarization direction of a single-polarized antenna to horizontal.
Apply petroleum jelly around the exterior side
①
of the feed. Do not apply petroleum jelly to the end face
②
of the feed.
V (default)
Points to H mark
Apply petroleum jelly to
the O ring
①
. Do not
apply petroleum jelly on
the end face
②
of the
antenna port.
Install hybrid couplers on the antenna.
①
②
32/33 >>
①
Refer to the antenna use instructions for information on how to
change the polarization direction.
②
Install
RTN 380es onto the hybrid coupler.
Before installing the RTN 380e, remove the
protective cover and film on the antenna port.
Otherwise, the signal transmission will be affected.
Install the RTN 380e on the antenna. The antenna port of the RTN 380e can adapt to the polarization direction of the antenna.
The antenna port of the RTN 380e can adapt to the polarization
direction of the antenna. There is no need to manually change
the polarization direction of the antenna port.
Incorrect
Correct
Vertical