Installation Reference
Installing the Outdoor Optical Splitter
Route in and fix fibers.
5
Use hose clamps to fix outdoor fibers on the
appropriate hooks.
Guide the lead nylon of outdoor fibers through fiber
fixing holes, fix the lead nylon, and cut off any excess.
Fix the fiber metal jacket in the fiber routing clips.
Remove dustproof caps and insert fiber connectors into appropriate adapters
according to labels.
Port in Fiber
Distribution
Area
Interconne
cted GE
Port
Description
101
Main RTN
380e
Connected to GE receive port on the main OptiX RTN 380e
201
Connected to GE transmit port on the main OptiX RTN 380e
102
Standby
RTN 380e
Connected to GE receive port on the standby OptiX RTN 380e
202
Connected to GE transmit port on the standby OptiX RTN 380e
IN2
Customer
equipment
Connected to GE receive port on the customer equipment
IN1
Connected to GE transmit port on the customer equipment
Wrap outdoor fibers with three layers of waterproof tape. Ensure that the taped fiber
is a close fit in the cable trough and that the case is properly sealed and
waterproofed.
Picture showing the coding ports and
fibers in a fiber distribution area
Do not stretch waterproof tapes when using them to wrap
outdoor fibers.
Three layers of
waterproof tape
Sealing
positions
Main RTN 380e
Standby RTN 380e
Customer
equipment
52/53 >>