background image

Numbe
r

Indicator/
Button

Color

Description

4

MODE: mode
switch button

-

l

When you press this button once, the
service port indicators change to the
speed mode and show the speed of each
service port.

l

When you press this button a second
time, the service port indicators restore
to the default mode, the service port
indicator shows the port link or activity
state.

If you do not press the MODE button
within 45 seconds, the service port
indicators restore to the default mode. In
this case, the SPED indicator is off.

5

Service port
indicator

Meanings of service port indicators vary in different modes.
For details, see 

Table 3-3

.

 

Table 3-3

 Description of service port indicators in different modes

Display Mode

Color

Description

default mode

Off

No link has been established to the port or
the port has been shut down.

Green

l

Steady on: A link is established on the
port.

l

Blinking: The port is sending or
receiving data.

Speed mode

Green

l

Off: The port is not connected or has
been shut down.

l

Steady on: The port is operating at
10/100 Mbit/s.

l

Blinking: The port is operating at 1000
Mbit/s.

 

3.3 Hardware Modules

Figure 3-4

 shows the logical structure of hardware modules of the switch.

Hardware modules of the S1720 refer to the SCU (Switch Control Unit) and power supply.

S1720 Series Ethernet Switches
Product Description

3 Hardware Architecture

Issue 01 (2014-07-20)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

12

Summary of Contents for S1720


































Reviews: