background image

 

 

Limited Warranty 

Subject to the exclusions contained below, Huawei Technologies Co., Ltd. 
(referred to as Huawei) warrants its access terminals ("Products") to be free from 
defects in materials and workmanship under normal consumer usage for one year 
from the date of purchase of the product ("Warranty period"). During the 
warranty period, a Huawei authorized service partner shall remedy defects in 
materials and workmanship free of charge. 

Special Notice: 

1.

 

The warranty card shall be applicable only after being stamped by the dealer. 

2.

 

The  warranty  card  must  be  preserved  in  good  condition  and  free  of  any 
scratch or alteration. 

3.

 

To  claim  such  service  for  defects  that  are  not  included  in  the  following 
exclusion terms, the warranty card and the invoice that records the product 
serial number shall be presented to a Huawei authorized service partner. 

Exclusions: 

In any of the following cases, the warranty card becomes unenforceable or 
inapplicable without prior notice: 

1.

 

The defects are caused by improper handling in transportation and assembly. 

2.

 

The defects are caused by the fact that the product is dismantled or altered by 
anyone that is not from a Huawei authorized service partner. 

3.

 

The  defects  are  caused  by  the  fact  that  the  product  is  used  in  a  harsh 
environment that is not suitable for the operation of the product. 

4.

 

The defects are caused by any force majeure including but not limited to fire, 
earthquake, lightning and tsunami. 

5.

 

The  defects  are  caused  by  the  fact  that  the  product  is  used  or  handled 
improperly, roughly or not as instructed in the applicable User Guide. 

6.

 

The normal wear and tear, including but not limited to the normal wear and 
tear of the shell and the power module, shall not be covered by the limited 
warranty. 

7.

 

The  warranty  card  is  altered  or  illegible,  or  the  product  serial  number 
recorded on the warranty card is inconsistent with the actual one imprinted or 
labeled on the product. 

In any case that is not covered by this limited warranty or should the warranty 
expire, Huawei shall charge for the service(s) claimed for the products if the 
product is still remediable. Huawei preserves the right for interpretation of this 
limited warranty. 

 

 

Huawei Technologies Co., Ltd. 

Address: Huawei Industrial Base 

Bantian, Longgang 

Shenzhen 518129 

People's Republic of China 

Website: http://www.huawei.com 

Summary of Contents for SmartAX MA5671













Reviews: