Figure 4-15 Installing a fire extinguisher cylinder (two SmartLi cabinets and
one lithium battery side cabinet)
Step 9 Remove the fire-trace tube and dry contact cable from the rear of the SmartLi.
NO TE
Store the removed cable clips in a proper place for future use.
1. Cut off the cable ties that secure the fire-trace tube.
2. Remove the cable clips that secure the fire-trace tube and dry contact cable.
3. Place the fire-trace tube and dry contact cable on the battery tray at the first
layer.
SmartLi 2.0
User Manual
4 Installation
Issue 09 (2022-01-30)
Copyright © Huawei Technologies Co., Ltd.
55