Huawei TaiShan 200 2280 Maintenance And Service Manual Download

Page: 204 / 209

Figure A-1 BIOS in the system

For details, see the

TaiShan Server BIOS Parameter Reference

A.3 iBMC

The iBMC is a Huawei proprietary intelligent management system that remotely

manages servers.
The iBMC complies with Intelligent Platform Management Interface (IPMI)

standards. It provides various functions, including keyboard, video, and mouse

(KVM) redirection, text console redirection, remote virtual media, and reliable

hardware monitoring and management.
The iBMC provides the following features:
●

Multiple management interfaces for system integration
The iBMC provides IPMI, CLI, Data Center Manageability Interface (DCMI),

Redfish interfaces, Hypertext Transfer Protocol Secure (HTTPS), and SNMP.

●

Fault detection and alarm management
The iBMC implements fault detection and alarm management, ensuring

stable, uninterrupted 24/7 system operation.

●

Virtual KVM and virtual media
The iBMC provides virtual KVM and virtual media, facilitating remote

maintenance.

●

WebUI
The iBMC provides a web-based UI for setting and querying device

information.

●

System breakdown screenshots and video playback
The iBMC allows screenshots and videos to be created when the system

breaks down. The screenshots and videos help to identify the cause of system

breakdown.

TaiShan 200 Server

Maintenance and Service Guide (Model 2280)

A Appendix

Issue 04 (2020-01-16)

197

Summary of Contents for TaiShan 200 2280


















































































































































































































Search results

Summary of Contents for TaiShan 200 2280

Reviews:

Related manuals for TaiShan 200 2280

Brands by name

Popular brands

Huawei TaiShan 200 2280, Maintenance And Service Manual

Search results

Summary of Contents for TaiShan 200 2280

Reviews:

Related manuals for TaiShan 200 2280

Brands by name

Popular brands