TP48200A-HX09A2 & TBC300A-TCA2
Installation Guide
10 Commissioning
Issue 01 (2013-10-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
86
Main Menu Second-
Level Menu
Third-Level
Menu
Fourth-
Level Menu
Fifth-Level
Menu
Default
Value
Setting
Settings
Parameters
Protocol
Type
M/S Protocol
M/S Protocol
M/S Protocol
Northbound
Baud Rate
9600
9600
Comm.
Address
3
3
----End
10.7.3 Setting Parameters Before Using the SNMP Management
Prerequisites
Before setting SNMP parameters, obtain the information listed in
Table 10-9
Information obtained from the NMS
Information
Description
SNMP version
SNMP version and port number used by the SMU and NMS. The SNMP
versions include
SNMPv1
,
SNMPv2c
, and
SNMPv3
.
SNMP Port Number
Read Community Name
If you use SNMPv1 or SNMPv2c, enter the read community name and write
community name that comply with the NMS. Otherwise, the SMU will not
connect to the NMS.
Write Community Name
User Name
To enhance the security, you need a user name and password for
authentication if you use SNMPv3. After the authentication succeeds, the
SMU can communicate with the NMS.
MD5 Password
DES Password
Trap Target Address
IP address and port number reported in the alarm trap.
Trap Port
Procedure
Step 1
Apply to the site or equipment room network administrator for a fixed IP address.
Step 2
Set the IP address, subnet mask, and gateway on the LCD, as shown in
