Figure 5-2
Conference control from the remote control UI
5.9 Screen Layout
You can adjust the screen layout to display a desired combination of video and presentation.
l
On the web interface, you can set the screen layout to full-screen, Picture in Picture
(PiP), or Picture out Picture (PoP).
–
Full-screen
One channel of video or presentation is displayed in full-screen mode.
–
PiP
One channel of video is displayed in full-screen mode. At the same time, another
channel of video is displayed in an inset window that appears in the lower right
corner of the display. The small video is approximately 1/16 of the full-screen
video.
–
PoP
Two panes are provided to display video and presentation.
l
On the remote control UI, you can also switch the layout between full-screen, PiP, and
split-screen (PoP) mode.
5.10 USB-based Configuration
The TE10 automatically imports its configuration files from a USB device. The process is
simple and efficient and no professional knowledge is required. The USB device that contains
the configuration files can be obtained from agents or carriers. When the configuration files
are imported to the TE10 from the USB device, all configuration data is loaded automatically.
5.11 Network Address Book
The network address book stores all site information. The administrator can import or export
the address book and update the entries in batches using the web interface.
TE10 Videoconferencing Endpoint
Product Overview
5 Functions and Features
Issue 01 (2016-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
17