HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
3 Network
Issue 01 (2013-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
31
Parameter
Description
Setting
Encryption
mode
Specifies the encryption method used on
the Wi-Fi network. The required key
types vary depending on your settings of
this parameter. If you set
Encryption
mode
to
NONE
, the Wi-Fi network
provided by your endpoint is open to
everyone.
Default value:
NONE
Specifies the password used by other
devices to connect to your endpoint.
The required password varies
depending on your settings of
Encryption mode
. If you set
Encryption mode
to
NONE
,
the Wi-Fi network provided by
your endpoint is open to
everyone.
Local IP
address
Subnet mask
Specify the IP address and subnet mask
of your endpoint.
Default values:
Local IP address
:
192.168.2.1
Subnet mask
:
255.255.255.0
DHCP
Specifies whether your endpoint assigns
IP addresses to devices connected to it.
NOTE
If you select this parameter, you must also set
Start IP address
and
End IP address
.
This parameter is selected by
default.
Start IP
address
End IP
address
Specify the IP address segment for the
devices connected to your endpoint.
Default values:
Start IP address
:
192.168.2.10
End IP address
:
192.168.2.100
Step 3
Select
Save
.
In the
Connected devices
list box, you can view the MAC and IP addresses of all the devices
connected to your endpoint.
----End
3.2 Connecting to a 4E1 Network
Only the TE60 supports 4E1 functions. To implement video communication over a 4E1-line
dedicated network, you must connect the TE60 to the network.
