HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
6 Conference
Issue 01 (2013-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
73
For details, see section
4.2.5 Switching Between Screen Layouts
6.2 Experiencing an MSUC Conference
Huawei videoconferencing systems can be used in the Microsoft Unified Communications
(MSUC) environment. Register the endpoint (networked with MSUC) with a Lync Server
using SIP. After that, the endpoint can place calls to Lync clients, receive calls from Lync
clients, and view Lync clients' online status.
Background
After the endpoint joins the MSUC network, the following can be implemented.
The endpoint and Lync clients can place calls to each other.
−
During a point-to-point call, switching between audio-only and video calls is
available on both the endpoint and Lync client.
−
The endpoint supports call forwarding on Lync clients. For example, if calls to Lync
A has been set to be forwarded to Lync B, then after a call between Lync A and
endpoint C is set up, endpoint C automatically disconnects from Lync A and calls
Lync B.
From
Address Book
you can view Lync clients' online status.
To view a Lync client's online status, you must save that Lync client to the local address
book. For details, see
Searching the LDAP Network Address Book for Sites
The following describes how the endpoint places a call to the Lync client.
Procedure
Step 1
Register the endpoint with the MSUC network.
1.
Choose
Advanced
>
Settings
>
Network
>
IP
>
SIP
.
2.
Set the SIP parameters for interworking with the MSUC and registering the endpoint
with the Lync Server.
describes the related parameters.
Table 6-1
SIP parameters
Parameter
Description
Setting
Register
with server
Specifies whether your endpoint registers
with a Lync Server.
An endpoint that registers with a Lync
Server can place calls to remote sites
using their IP addresses or site numbers
if the remote sites also register with Lync
Servers.
NOTE
If you select this parameter, you must also set
Server address
,
Site number
,
User name
,
and
Password
.
Select this parameter.
Server
address
Specifies the IP address or domain name
of the Lync Server with which you want
Example 1: 192.168.1.10
