![background image](http://html.mh-extra.com/html/huawei/telecom-power-tp48200a-dt19c1/telecom-power-tp48200a-dt19c1_installation-manual_167791092.webp)
TP48200A-DT19C1 & DT19C2 & HT19C1 & HT19C2
Installation Guide
10 Commissioning
Issue 03 (2014-02-23)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
85
Main
Menu
Second-
Level
Menu
Third-
Level
Menu
Fourth-
Level
Menu
Default
Value
Setting
Batt. Temp.
Sensor 1
Yes
Batt. Temp.
Sensor 2
None
vary based on the system type.
10.7 (Optional) Setting Hibernation Parameters
Set
Hibernation Enable
to
Yes
if you need to enable the intelligent hibernation function of
the rectifiers.
Table 10-5
Setting hibernation parameters
Main Menu
Second-Level
Menu
Third-Level
Menu
Default Value Setting Value
Parameters
Settings
Energy Saving
Hibernation
Enable
No
Yes
10.8 Setting Communications Parameters
10.8.1 Setting Parameters Before Using WebUI Management
Procedure
Step 1
Apply to the site or equipment room network administrator for a fixed IP address.
Step 2
Set the IP address, subnet mask, and gateway on the LCD, as shown in
Table 10-6
IP parameters
Main Menu
Second-
Level Menu
Third-Level
Menu
Default Value
Setting Value
Setting
Wizard
Network
Parameters
IP Address
192.168.0.10
Set this parameter according to
the IP address assigned by the
network administrator.