24
5. Connection Function
Connectivity Settings
Select
Settings
>
Connectivity
. You can set the Bluetooth,
network access point or select data connection modes.
NOTE:
•
Your phone supports USB 2.0.
•
Your phone supports plug and play function.
•
The PC assistant installation programme and USB
driver are embedded in the mobile phone.
•
The PC Options software supplied on your phone will
run automatically after you connect your phone to the
PC .
USB
You can synchronise data between your phone and PC,
surf the Internet with your phone and read the memory card
by USB cable.
NOTE:
•
To connect your phone with a PC through USB cable,
first connect the USB connector to your phone, and
then connect the other end of the cable to the PC. To
disconnect your phone from the PC, first disable the
PC Assistant, then disconnect the USB connector from
the PC, and finally disconnect the USB cable from your
phone.
•
If the PC cannot recognise your phone when
connecting through the USB cable, power off and
restart the PC and then retry.