background image

41 

Emergency Call 

You can use your device for emergency calls in the service area. 
The connection, however, cannot be guaranteed in all conditions. 
You should not rely solely on the device for essential 
communications. 
Certification Information (SAR) 

This mobile device meets guidelines for exposure to radio waves. 
Your device is a low-power radio transmitter and receiver. As 
recommended by international guidelines, the device is designed 
not to exceed the limits for exposure to radio waves. These 
guidelines were developed by the independent scientific 
organization International Commission on Non-Ionizing 
Radiation Protection (ICNIRP) and include safety measures 
designed to ensure safety for all users, regardless of age and 
health. 
The Specific Absorption Rate (SAR) is the unit of measurement 
for the amount of radio frequency energy absorbed by the body 
when using a device. The SAR value is determined at the highest 
certified power level in laboratory conditions, but the actual SAR 
level of the device when being operated can be well below the 
value. This is because the device is designed to use the minimum 
power required to reach the network. 
The SAR limit adopted by USA and Canada is 1.6 watts/kilogram 
(W/kg) averaged over one gram of tissue. The highest SAR value 
reported to the FCC and IC for this device type when tested for 
use at the ear is 0.691 W/kg, and when properly worn on the 
body is 0.617 W/kg. 
FCC Statement 

This equipment has been tested and found to comply with the 
limits for a Class B digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency 

Summary of Contents for U5300















































Reviews: