UPS2000-A-(6 kVA-10 kVA)
User Manual
3 Installation
Issue 05 (2019-12-19)
Copyright © Huawei Technologies Co., Ltd.
41
Figure 3-12
Connecting cables to the UPS professional version with standard backup time
Step 5
Reinstall the AC input and output wiring cover on the UPS.
----End
3.2.3.3 Connecting Cables to the UPS Standard Version with Long Backup
Time
Procedure
Step 1
Switch off the AC input circuit breaker at the rear of the UPS, the upstream AC circuit
breaker of the UPS, and the battery circuit breaker.
Step 2
Remove the AC input, output, and battery wiring cover from the UPS.
Step 3
Install AC output power cables, and AC input power cables in sequence, as shown in
Figure 3-13
Connecting cables to the UPS standard version with long backup time
Step 4
Install battery cables to external battery strings or external battery boxes.
connecting cables to external battery strings,
shows connecting cables to external
battery boxes.