Figure 1-7 Removing packing materials
Step 5 Remove the moisture-proof bag.
Step 6 Check that the device is intact.
1. Visually inspect the UPS appearance for shipping damage. If any damage is
found, notify the carrier immediately.
2. Check that the fittings comply with the packing list. If there is any
discrepancy, keep a record and contact the supplier immediately.
Step 7 Remove the UPS front panel.
NO TICE
Remove both the upper and lower front panels from the UPS. Removing the lower
one facilitates the removal of L-shaped brackets. Removing the upper one prevents
it from falling off during transportation.
1. Press the switches on both sides of the upper front panel and remove the
upper front panel.
2. Remove the screws that secure the lower front panel.
3. Remove the ground cable between the lower front panel and the chassis, and
remove the lower front panel.
UPS5000-A-(30 kVA–120 kVA)
Quick Guide
1 Installation
Issue 14 (2022-09-06) Copyright © Huawei Digital Power Technologies Co., Ltd.
16
