UPS5000-A-500 kVA
User Manual (e-shelter)
4 User Interface
Issue 02 (2020-01-10)
Copyright © Huawei Technologies Co., Ltd.
117
4.2.2 Monitoring Page
Figure 4-50
Monitoring
If
NA
is displayed for load ratio, the value is invalid or outside the range.
Table 4-12
Monitoring page details
Numb
er
Area
Function
1
Running status
area
Displays the power flow and UPS running information.
2
Menu bar
Displays alarms and real-time data, sets parameters, and
provides control commands.
The
Active Alarms
page is displayed by default.
3
Information
area
Displays system monitoring information.
The parameters that have been introduced in the LCD section are not described in the WebUI
section.
The information displayed in
Active Alarms
and
Real-time Data
is the same as that on the
LCD, so the information is not described in the WebUI section.
4.2.2.1 Param. Settings Page
Set basic parameters, advanced parameters, input parameters, output parameters, bypass
parameters, battery parameters, and dry contacts on the
Param. Settings
page.