5
2. Remove the cabinet connecting kits from
the rack.
3. Secure the connecting kits in the
connection positions on the front door
using screws.
1. Open the front and rear doors. Wrench the
anchor bolts using an wrench to adjust the
cabinet height. Use a level to level the cabinet.
4. Use the same method to secure the
connecting kits in the connection
positions on the rear door.
5
Connecting Cables
5. Repeat the procedure to combine other cabinets.
6. Secure the bolts using a socket wrench.
• Prepare cables away from the cabinets to prevent scraps from falling inside. Cable scraps may
ignite and cause personal injury or device damage.
• After cables have been installed, clean the cabinet in a timely manner. Ensure that there is no
foreign matter inside and around the cabinet.
• You need to prepare terminals onsite. The stripped length of the copper wire should be the
same as that of the part of the terminal that covers the conductor.
Remove the screw from the supporting kit
of the connecting kit to secure the
connecting kit.
UPS Cable Connection Reference
5.1