2
3. Connect the device's MGMT port to the administrator PC using a network cable.
4. Insert the cable retention clip into the hole close to the power socket. Then insert the power cable into the socket, and fix
it using the clip.
5. Turn on the power switch. When the SYS indicator on the front panel is blinking (once every two seconds), the device is
running and ready for configuration.
Secospace USG6000
4 HDD
5 PWR 6 PWR
INPUT OUTPUT
ON
OFF
~100-240V;50/60Hz;2.5A
XXXXXXXXXXXXXXXXXXXXXXXXXXX
SM-HDD-SAS300G-B
Secospace USG6000
0
1
2
3
4
5
6
7
8
9
10
11
0
1
RST
SYS
ALM
PWR
HDD
MGMT
MODE
0/1
2
3
CONSOLE
MGMT
WSIC(Slot 3)
WSIC(Slot 2)
GE0/0/0
3
5
4
1
GE1/0/6
2
Administrator
Intranet
Front panel
Rear panel
Switch
GE1/0/4
2
Cellular0/0/0
2
4G station
4G access or Ethernet access
Default Con
fi
guration
The following table lists the default con
fi
guration.
Item
Description
MGMT (management port)
The MGMT port is numbered GE0/0/0 and assigned with IP address 192.168.0.1.
Administrator account/password
You can use the default account/password (admin/Admin@123) to log in through web or
console.
Connecting to the Internet
Collect the information in the following table based on the WAN mode you use and the IP address plan for the LAN. The un-
derlined red texts in the table are examples for reference only.
Item
Port
Description
WAN
GE1/0/4
WAN Mode Static IP IP Address:
1.1.1.1
Request your ISP or
network administrator
to provide the data.
Subnet Mask:
255.255.255.0
Default Gateway:
1.1.1.254
Primary DNS:
2.2.2.2
(Optional) Secondary DNS:
2.2.3.3
PPPoE
User name/Password:
user/Password123
DHCP
-
The device functions
as a DHCP client.
Cellu-
lar0/0/0
WAN Mode 4G
APN:
example
Request your ISP or
network administrator
to provide the data.
User name/Password:
user01/Admin@123
Dial string:
*99#
