Step 5
Insert the new CF card into the CF card 2 slot the MPU/SRU and push it in the proper
position, as shown in
(1). Close the shielding can properly, as shown in
(2).
Figure 3-44
Inserting CF card 2
Step 6
Check whether the new CF card is working properly.
You can check the running status of the new CF card in the following ways:
l
Check the CF ACT indicator (green) on the panel of the MPU/SRU. If it is steady on or
blinking, the new CF card is working normally.
l
Check the alarms. If the system does not generate any alarm related to the new MPU/
SRU, the CF card is working properly.
l
Run the
dir
command on the console interface to check whether the new CF card can be
displayed. If the new CF card is working normally, the following is displayed:
<sysname>
dir ?
/all List all files
STRING<1-64> [drive]
[path][file name]
cfcard2: Device name
cfcard: Device name
slave#cfcard2: Device name
slave#cfcard: Device name
<cr>
The preceding output also indicates that the new CF card has returned to the normal state. If
the new CF card does not work normally, contact a local Huawei office for technical support.
----End
HUAWEI USG9500 Series
Hardware Guide
3 Hardware Maintenance
Issue 03 (2017-12-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
399
