Name
Description
SPC
! NOT SWAP
The SPC and SPU share one sales code in a slot. They both
must be replaced at the same time.
OFL button
To remove an SPC, press and hold the OFL button for six
seconds until the OFL indicator turns red for one second and
then turns off.
OFL indicator
l
If the indicator is green and blinks once every second (1
Hz), the SPC is running normally.
l
If the indicator is green and blinks four times every second
(4 Hz), the SPC is in the alarm state or starting but not
registered.
l
If the indicator turns red for one second and then turns off,
you can safely remove the SPC.
Interface Attributes
The SPU-X8X16-20-O-E8KE does not have external interfaces.
Technical Specifications
lists the technical specifications of the SPU-X8X16-20-O-E8KE.
Table 1-66
Technical specifications of the SPU-X8X16-20-O-E8KE
Item
Specifications
Board silkscreen name
SPUD
SPU-X8X16-20-O-E8KE
Dimensions (width x
depth x height)
400 mm x 520 mm x 41 mm
Typical power
consumption
284 W
Maximum power
consumption
311.9 W
Typical heat
consumption
969 BTU/hour
Maximum heat
consumption
1064.2 BTU/hour
Board weight
6.96 kg
Maximum input voltage
range (DC)
-72 V to -38 V
HUAWEI USG9500 Series
Hardware Guide
1 Hardware Overview
Issue 03 (2017-12-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
125
