Context
CAUTION
l
The USG9560 is heavy and requires four people to lift and move.
l
Use the handles on the chassis sides when moving the device. To avoid damaging the
device, do not use the handles on modules.
l
Do not step on the air filter at the bottom of the cabinet.
Procedure
Step 1
Install floating nuts and guide rails.
1.
Determine where to install floating nuts and mark the positions using a marker, as shown
in
2.
Fix the floating nuts in the positions.
3.
Use M6 screws to fix the guide rails in position.
Figure 2-26
Installing floating nuts and guide rails
Location of floating nuts for guide rails
M6
1U
The third hole in rack unit 3 (for device)
The third hole in rack unit 6 (for device)
The first hole in rack unit 13 (for device)
The first hole in rack unit 16 (for device)
The second hole in rack unit 17 (for fiber spool)
The second hole in rack unit 18 (for fiber spool)
Chassis
AC power chassis
(AC power source is used)
1U
Location of floating nuts for guide rails
M6
（
for power chassis
）
（
for power chassis
）
Step 2
Install mounting ears on the USG9560.
HUAWEI USG9500 Series
Hardware Guide
2 Hardware Installation
Issue 03 (2017-12-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
271
