address. You need to set this parameter when the IP address of the local
interface resides on a different subnet as the FTP server IP address.
user (u) : 8090
ftp123
//Indicates the FTP user name. This
user name must already have been set on the device that provides the FTP
service.
ftp password (pw) (blank = use rsh): ******
Hello@123
//Indicates the
FTP password. This password must already have been set on the device that
provides the FTP service.
flags (f) : 0x0 //Indicates the protocol
used for downloading files. 0x0 indicates FTP, and 0x80 indicates TFTP. Here,
FTP is used as an example.
target name
(tn) :
startup script
(s) :
other
(o) :
3.
In the Ethernet submenu, enter
2
to download the file to the CF card.
Ethernet
Submenu
1. Download file to SDRAM through ethernet interface and
boot
2. Download file to CFcard through ethernet
interface
3. Modify ethernet interface boot
parameters
4. Return to main
menu
Enter your choice(1-4):
2
4.
In the submenu, enter
1
to download the file to CF card 1.
Download to CFcard through ethernet interface
Submenu
1. Download file to
CFcard
2. Download file to
CFcard2
3. Return to up
menu
Enter your choice(1-3):
1
Attaching interface lo0...
done
Attached IPv4 interface to mottsec unit
3
boot device :
mottsec
unit number :
0
processor number :
0
host name :
HUAWEI USG9500 Series
Hardware Guide
3 Hardware Maintenance
Issue 03 (2017-12-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
342
