l
If overhead cabling is used, a cable outlet must be reserved on the top of the cabinet; if
underfloor cabling is used, a cable outlet must be reserved in the bottom of the cabinet.
l
The cabinets contain installation accessories such as slide rails, captive nuts, and screws.
l
The cabinets contain ground points. If the ground point is reserved, connect the device to
the ground point and connect the ground point to the ground busbar. If the ground point
is not reserved, connect the device to the ground busbar directly.
l
On customized cabinets, porosity must be greater than 50% on the front and rear doors.
l
If a device uses front and rear access modes, it cannot be installed against a wall. This is
to ensure that at least 760 mm of space is available for maintenance.
A.7 Fault Tag
Fault Tag
*Customer name:
Address:
Contact person:
Tel.:
Fax:
Category*:
□
RMA
□
Return
□
Analysis
BOM
Code
Product
Descriptio
n
Bar Code* Fault
Occurring
Date*
Descriptio
n of the
Fault
Phenomen
a*
Category
No.*
Software
Version*
Reasons for Repairing (Category No.):
HUAWEI USG9500 Series
Hardware Guide
A Appendix
Issue 03 (2017-12-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
501
