background image

Battery Leakage

NOTICE

When the electrolyte overflows, absorb and counteract the electrolyte immediately.

When moving or handling a battery whose electrolyte leaks, note that the leaking electrolyte
may hurt human bodies. When you find the electrolyte leaks, use the following substances to
counteract and absorb the leaking electrolyte:

l

Sodium bicarbonate (baking soda): NaHCO

3

l

Sodium carbonate (soda): Na

2

CO

3

Select a substance to counteract and absorb the leaking electrolyte according to the instructions
of the battery manufacturer.

1.6.2 Lithium Battery

CAUTION

l

There is danger of explosion if the battery is incorrectly replaced. Therefore, replace the
battery only with the same or equivalent type recommended by the manufacturer.

l

Exhausted lithium ion batteries must be disposed of according to the instructions.

l

Do not throw lithium ion batteries into fire.

1.7 Radiation

This topic describes safety notice about electromagnetic field exposure and laser.

1.7.1 Electromagnetic Field Exposure

CAUTION

Radio-frequency signals with high intensity are harmful to human body.

Before installing or maintaining an antenna on a steel tower or a mast with a large number of
transmitter antennas, coordinate with the parties concerned to shut down the transmitter
antennas.

Tecal ES3000 High Performance PCIe SSD Card
User Guide

1 Security

Issue 04 (2014-03-05)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

9

Summary of Contents for V100R002C01



























































































































Reviews: