CAUTION
l
Be careful when moving heavy objects to avoid any injury to the human body.
l
Be careful when pulling a chassis out of the rack to avoid any injury to the human body
caused by unstable or heavy devices.
l
Do not move a heavy chassis by yourself. Work with you partner. When moving a chassis,
Keep your back straight and move smoothly to avoid any injury.
l
Hold the chassis handles or bottom edges when moving or lifting a chassis. Do not use the
handles on any component, such as fan modules, PSUs or boards.
1.10 ES3000 Safety Precautions
This topic describes the safety precautions for operating the ES3000.
NOTICE
To ensure your personal safety and to avoid damaging the equipment, only trained and qualified
technical personnel are allowed to install or replace an ES3000.
NOTICE
Before installing an ES3000, turn off the power to the server.
NOTICE
Do not touch the components on an ES3000 with bare hands. The electrostatic discharge (ESD)
on the human body may damage the electrostatic sensitive components on the circuit board.
Ensure that you wear an ESD wrist strap or ESD gloves when operating the ES3000 hardware.
NOTICE
To prevent yourself from being scalded, do not touch the heat sink with bare hands because the
heat sink temperature is high during the running of the ES3000.
Tecal ES3000 High Performance PCIe SSD Card
User Guide
1 Security
Issue 04 (2014-03-05)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15
