2. Choose System Settings > Signal Name Modify. The Batch Signal
Configuration page is displayed.
3. Set Device type to ECC800, set Device name to ECC800, and click OK.
4. On the query result tab page, set the new signal name of AI/DI_3 to Leak
and click Submit.
5. Choose Monitoring > System > ECC800 > Running Parameters > AI/DI_3
Port Settings.
6. Set Leak sensor to Enable and click Submit.
7. Confirm that Leak sensor type is automatically identified as Leak
sensor(Rope).
8. Click Unhide All Advanced Signals, and click Power Supply Parameters.
Ensure that II power supply enable(AIDI_3/COM2/AIDI_5) is Yes.
Step 2 Check functions of water sensors.
Table 5-14 Function check
Check Method
Normal Connection
Status
Alarm Clearance
Method
Immerse the water
detection cable in water.
Leak DI alarm is
generated on the active
alarm screen of the app
or on the WebUI.
Wipe dry the water
detection cable. The
alarm disappears
automatically.
----End
5.3.9 Commissioning Cabinet Electronic Clasp Locks
When the system type is FusionModule800 and the cabinet electronic clasp locks
are installed, perform the following steps to configure it.
Prerequisites
●
The cabinet electronic clasp locks of odd- and even-numbered cabinets have
been cascaded in hand-in-hand mode respectively. One end of a network
cable is connected to the RS485_IN port on the first cabinet electronic clasp
lock of an odd-numbered cabinet, and the other end of the cable is connected
to the COM2 port on the ECC800-Pro; one end of another network cable is
connected to the RS485_IN port on the first cabinet electronic clasp lock of an
even-numbered cabinet, and the other end of the cable is connected to the
COM3 port on the ECC800-Pro.
●
The smart module view has been deployed.
●
The cabinet door can be opened and closed properly. If the cabinet door
cannot be opened and closed properly, adjust the position of the cabinet
electronic clasp lock by performing steps 1 and 2.
FusionModule800 Smart Small Data Center
User Manual
5 Power-On Commissioning
Issue 01 (2021-02-05)
Copyright © Huawei Technologies Co., Ltd.
282