running properly, and whether the parameter settings are consistent with
the device parameters.
5. Repeat
to connect other cabinet electronic clasp locks.
Step 5 Commission the cabinet electronic clasp locks.
Table 5-17 Function check
Function Path
Operation
View
cabinet
electroni
c clasp
lock
informati
on
ChooseMonit
oring >
Cabinet > IT
Cabinet101>
E-LOCK1
a
.
Click the
Running Info
tab.
View the running information
about cabinet electronic clasp
lock 1 on the WebUI.
Change
the
cabinet
electroni
c clasp
lock
name.
Click the
Running
Parameters tab.
Change the cabinet electronic
clasp lock name.
Remotely
open a
cabinet
electroni
c clasp
lock
Click the
Controls tab.
Select Open front door or Open
back door from the Cabinet
door control drop-down list box,
and click Submit to remotely
open the door.
Open
cabinet
electroni
c clasp
locks in
batches
Choose Monitoring > Cabinet,
click the Controls tab
Select Open front door, Open
back door, or Open all doors
from the Open the door drop-
down list box, select the setting,
and click Submit. The cabinet
electronic clasp locks unlock the
doors in batches based on the
signal value.
a: Intelligent lock 1 of IT cabinet 101 is used as an example.
Step 6 When closing the door, rotate the lock handle vertically downwards. If the door
cannot be opened or closed properly, locate the fault.
1. Check whether there is friction between the lock tongue and the electronic
lock. If there is friction, adjust the installation position of the electronic lock.
FusionModule800 Smart Small Data Center
User Manual
5 Power-On Commissioning
Issue 01 (2021-02-05)
Copyright © Huawei Technologies Co., Ltd.
285