FusionModule1000A40 Prefabricated All-in-One Data
Center
Commissioning Guide
8 Commissioning Core Components
Issue 02 (2019-12-20)
Copyright © Huawei Technologies Co., Ltd.
67
No. Parameters Note
critical alarms,
as shown in
.
Procedure
Step 1
Tap
>
Teamwork Settings
on the main screen to enter the
Teamwork Settings
page.
To change the settings, you need to log in as the
Admin
user. For the password, see the
management system initial configuration table.
Set the teamwork function on the teamwork setting screen. Parameters to be set for the master
device include
Teamwork unit no.
,
Teamwork unit address
,
Teamwork function
,
Network
,
Total number of units
,
Number of running units
,
Standby mode rotation
,
Rotation period
,
Rotation time
,
Forced rotation
,
Requirement control
, and
Cascade
.
However, a slave device only supports parameters like
Teamwork unit no.
,
Teamwork unit
address
, and
Teamwork function
.
Figure 8-7
Teamwork setting screen
Table 8-7
Teamwork settings
Parameter Description
Configuration
Principle
Default Value
Teamwork
group No.
The number of the
teamwork controlled
group, which is the
same for all the devices
in the group.
Set the assigned
teamwork control
number.
1
Smart
Smart cooling product
Set the assigned unit
NA
