FusionModule1000A40 Prefabricated All-in-One Data
Center
Commissioning Guide
8 Commissioning Core Components
Issue 02 (2019-12-20)
Copyright © Huawei Technologies Co., Ltd.
107
----End
8.4.4.1.5 Adding a Camera Using Automatic Discovery
This topic describes how to quickly add an online camera that is not in any management
domain to a management domain using the automatic discovery function provided by the
system.
Prerequisites
You have logged in to the NetEco client by web browser.
You have the operation rights for
Camera Management
.
You have set parameters on the
Parameter Configuration
page, and the connection
between the NetEco and VCN500 server is successful.
A camera has connected to the VCN server.
Procedure
Step 1
Choose
Monitor
>
Security
>
Camera Management
from the main menu.
Step 2
In the left navigation tree, choose
Discovery Camera
.
Step 3
On the
Discovery camera
page, add a camera by following the instructions provided in
Figure 8-32
Adding a camera using automatic discovery
The method of adding a camera using automatic discovery applies to all other management domains
except
Subnet
and
Root
.
After a camera is added, it will be displayed under the corresponding management domain on the
Data Center Planning
page. On the
Data Center Planning
page, you can set parameters such as
the
Name
for the camera.
