14
POWER
LAN
PON
RESET
Step 1: Connecting the cables
WAN
LAN
Internet
Optical/Broadband/cable modem
(from your broadband provider)
•
Erect the all antennae upright to ensure optimised Wi-Fi
®
signal.
•
If the indicator stays red, this indicates that the router is not connected to the Internet.
Please refer to "Step 2: Configuring the network settings".
•
For routers that support WAN/LAN auto-adaptation, the network ports are WAN/
LAN combo ports. You can also specify a fixed WAN port on the router's web-based
management page.