6
Logging in to the Web-Based Utility
Take the Windows XP operating system and the Internet Explorer 6.0 as examples.
Ensure that the CPE is connected to the PC. To log in to the Web-based utility, do as follows:
1.
Set the IP address of the PC and ensure that the IP address of the PC is in the same
network segment as that of the CPE.
NOTE:
By default, the IP address of the CPE is 192.168.1.1 and the subnet mask is
255.255.255.0.
If the CPE is working in DHCP mode, it is recommended that the IP address and DNS
settings be obtained automatically.
2.
Start the Internet Explorer, enter
http://192.168.1.1
in the address bar, and then press
Enter
.
3.
Enter the user name and the password (both are
user
by default) in the login window,
and then click
Login
.
For details about the settings of advanced parameters, see the online help in the
Web-based utility. To read the online help, you need to install the Adobe Reader 6.0 or later
versions.
