2
2. Description of Keys
Start key
When the air compressor is in standby mode, press this key to
start it;
In connection mode, the air compressor with a communication
address of 1 serves as the host, press this key to start the air
compressor, and the connection control starts at the same time.
Stop key
When the air compressor is running, press this key to stop it;
When a host is used in connection mode, press this key to stop
the air compressor and the connection control stops at the same
time.
When the equipment is in shutdown state, long press this key to
display the information of software version.
Load /
Unload key
When the air compressor is running, this key serves as Load /
Unload key.
In setup mode, press this key for confirmation and save input
data.
Confirm key
Down key
When viewing parameters, press this key to move the scroll bar
down;
When modifying data, press this key to decrease the flashing
data value in the current position.
Dec key
Up key
When viewing parameters, press this key to move the scroll bar
up;
When modifying data, press this key to increase the flashing
data value in the current position.
Inc key
Shift key
When modifying data, this key serves as Shift key and press it
to move the blinking cursor to the next bit;
When selecting menus, press this key to enter the lower level
menu of the current menu.
If the current menu does not have a lower-level menu, enter the
setup mode of the current menu, and the data on the current
menu starts to flash.
Enter key
Return key
In setup mode, press this key to exit the setup mode;
When viewing parameters, press this key to return to the
previous menu;
In case of fault shutdown, long press this key for 5 seconds to
reset the fault.
Reset key