background image

©Hubbell Incorporated  |  hubbellpowersystems.com

TD09232E

Introduction

Your safety, and the safety of others, is very important. The warnings and instructions 
contained in this manual are for your safety. Failure to follow safety warnings and 
instructions could result in serious injury or death. 

All information in this publication is based on the latest product information available at 
the time of printing. Hubbell Power Systems reserves the right to make changes at any 
time without notice and without incurring any obligation. 

This Owner’s Manual must always be kept with the hoist and should remain with the 
hoist if it is transferred or sold.

These instructions neither cover all details or possible situations in which you may use 
a chain hoist, nor do they provide for every possible contingency to be encountered in 
relation to installation, operation, or maintenance. Before each use, think through each 
use, your safety, and the safety of others. 

Should additional information and details be desired or if situations arise which are not 
covered adequately for your purpose, please contact Hubbell Power Systems.

Hubbell Power Systems, Inc  

210 N. Allen St
Centralia, MO 65240

(573) 682-5521
www.hubbellpowersystems.com

•  ¾-ton (1500 lbs/680 kg) Ratchet Link Chain Hoist (Cat. No. C3090438)

•  1-ton (2000 lbs/907 kg) Ratchet Link Chain Hoist (Cat. No. 3011S)

•  1½-ton (3000 lbs/1361 kg) Ratchet Link Chain Hoist (Cat. No. C3090439)

•  2-ton (4000 lbs/1814 kg) Ratchet Link Chain Hoist (Cat. No. 4012)

•  3-ton (6000 lbs/2722 kg) Ratchet Link Chain Hoist (Cat. No. C3090440)

Thank you for purchasing a CHANCE® Chain Hoist:

Summary of Contents for 096359016243





























Reviews: