CHANCE ONE-TON HOIST
The One-Ton Hoist is rated to lift loads up to and in-
cluding 2,000 pounds. Relatively light in weight, these
rugged hoists are well-balanced for easy handling and
fast operation.
• Simple Controls are Easy to Operate
The simple controls can be operated without removing
heavy work gloves or rubber gloves. Linemen like its
well-balanced, easy-to-grip handle . . . the half-link
and full-link take-up for accuracy and speed. There
are easy-working hooks on both the housing and chain
that swivel freely to allow for unwinding action of rope
or wire under tension. The hooks can be pulled in to a
minimum distance of 11 inches for working in cramped
quarters. The chain “free wheels” for ease in hooking
to the load. The control lever locks automatically when
the hoist is pulling a strain . . . thus a load cannot be
accidentally dropped.
• Ratchet-type Handle
Note that the handle is shaped for easy gripping . . .
has a ball-end to keep the hand from slipping off. This
ratchet-type handle can be operated from either side of
the housing . . . to avoid guys, poles, conductors, or other
obstructions that would interfere with the lever-motion
of the handle. The flexible, heavy-steel load chain will
not kink, bind or uncouple.
• Simple, Sturdy Construction
The hoist housing and handle are made of heat-treated
aluminum; the one piece shaft of hardened steel. Ex-
tremely simple, yet sturdy, the construction of the
Chance Hoist insures long, dependable service. All
working joints are fitted with permanently-lubricated
oilite bearings. All working parts are fully enclosed in
the housing unit—to provide protection for the hoist
mechanism, and to cover gearing for safety.
2
One-Ton Hoist (5
1
/
2
-Ft. Lift)
Approx.
Wt., Lbs.
14
1
⁄
2
The equipment covered in this instruction guide should be installed,
used, and serviced only by competent personnel familiar with
and following good work and safety practices. This equipment
is for use by such personnel and is not intended as a substitute
for adequate training and experience in safe procedures for this
type of equipment.
The information contained in this instruction guide has been com-
piled as a result of review of the product, its intended application
and use considerations. However, this instruction guide does
not cover all details or situations in equipment use nor does
it provide for every possible contingency to be encountered
in relation to installation, operation or maintenance. Should
additional information and details be desired or specific situ-
ations arise which are not covered adequately for the user's
purpose, consult your supervisor and the appropriate rules for
safe work practices.
Catalog
No.
3011S
Description
One-Ton Hoist: Safety Hooks
Both Ends
ONE TON HOIST
