Pub. 42004-056F
Model 13314-001 Div. 2 Hazardous Area 8-Ohm Horn Driver
Page:
2 of 3
f:\standard ioms - current release\42004 instr. manuals\42004-056f.doc
05/11
Install the mounting assembly and the horn, then complete the following instructions to install the driver
onto the horn.
Wiring Instructions
Field wiring to the driver must be made using the attached three-conductor type SO cord. Connect these
wires as follows:
•
Green
: earth ground
•
Black
: amplifier
+
terminal
•
White
: amplifier
−
terminal
Figure 2. Typical Installation of 13314 Series Driver
CAUTION
Installation must be in accordance with National Electrical Code for the appropriate hazardous
area classification.
