Pub. 42004-565B
TempSense Model TS100
Page
2
of 6
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-565B.docx
03/21
Installation
N
OTE
:
The accuracy of the TempSense TS100 requires individual subjects pass within two to six feet of
the thermal imaging camera lens. Results with different camera positions may vary. Thermal
imaging camera accuracy improves as the subject moves closer to the camera.
Camera Location
Locate the TempSense TS100 so that people in a queue individually pass through the two cameras’ shared
FOV (field of view) while facing the cameras. Each subject scanned should come within two to six feet
of the cameras. The ideal height for camera installation is 5 feet 5 inches above the floor. Installation at a
higher location requires aiming the TS100 downward so that each subject’s forehead passes through the
center of the FOV (see Figure 2 and Figure 3).
Figure 2. SAMPLE FIGURE Camera Positioning (Side View)
Figure 3. SAMPLE FIGURE Camera Positioning (Top View)
