Digital Teleprotection __________________________________________________________________
RF-MCGARDPRO
Hubbell Power Systems, Inc.
–
RFL™
Products
July 1, 2022
©2022 Hubbell Incorporated
6-18
allows an advanced user to verify that any one logic bit has or hasn’t been assigned the
right value.
Table 6-1 Digital Teleprotection Advanced Formula table
Tx-Ch1
Rx-Ch1
Tx-Ch2
Rx-Ch2
Tx-Ch3
Rx-Ch3
Tx-Ch4
Rx-Ch4
F1
x
y
x+8
y+12
x+16
y+24
x+24
y+36
F2
x+1
y+1
x+9
y+13
x+17
y+25
x+25
y+37
F3
x+2
y+2
x+10
y+14
x+18
y+26
x+26
y+38
F4
x+3
y+3
x+11
y+15
x+19
y+2?
x+27
x+39
F5
x+4
y+4
x+12
y+l6
x+20
y+28
x+28
y+40
F6
x+5
y+5
x+13
y+17
x+21
y+29
x+29
y+41
F7
x+6
y+6
x+14
y+l8
x+22
y+30
x+30
y+42
F8
x+7
y+7
x+15
x+29
x+23
y+3l
x+31
y+43
Ch. 0K
-
y+8
-
y+20
-
y+32
-
y+44
PP 0K
-
y+9
.
y+21
.
y+33
-
y+45
SB1
-
y+10
-
y+22
.
y+34
-
y+46
SB2
-
y+11
-
y+23
.
y+35
-
y+47
Note
: User does not have to click “Save” to update the table. The table is updated dynamically
as the values are entered. Settings will not become active until save is selected.
All data in user-entered fields (not drop-downs or controls) is validated according the
range/increment specified. Any fields changed to a valid entry will be flagged “green” and any
fields changed to an invalid entry will be flagged “red” and a warning presented beside the
field.
6.4
Digital Teleprotection Status
Selecting Status -> Digital Teleprotection provides selections for the installed TPS modules.
This page has a tab for the status of each channel and the advanced settings.
This page allows the user to view the status of different parameters of the Digital Teleprotection
module. Each module has its own page and its own sidebar menu item. User can select between
modules by using the sidebar menu or by using the drop-down next to the tabs, similar to
“Configure > PLC”. The user can select different channels within a Teleprotection module by
using the tabs on this page.
Note
: All four channel tabs are shown for each teleprotection module, regardless of whether
those channels are currently mapped to a timeslot / communications interface.
